How to measure your windows for curtains

Good measuring is the secret of curtains that look expensive. You only need a steel tape measure, a pencil and a few minutes.

1. Decide where the curtain will hang

First choose a rod or a track. A track fixed close to the ceiling makes the room look taller, while a rod just above the window frame is simpler. Measure from the position of the rod, not from the glass.

2. Measure the width

Measure the full width of the rod or track. For a full, elegant look, curtains are usually made about two times as wide as the track, and sheer fabric can be even fuller. Extend the track 10–20 cm beyond each side of the window so the curtains clear the glass when they are open.

3. Measure the drop

Measure from the rod or track down to where you want the curtain to end. Just above the floor, about 1–2 cm, is the most common choice. Measure on the left, in the middle and on the right, because floors and ceilings are not always level, and use the longest measurement.

Not sure?

Send us photos of the window and the measurements you have on WhatsApp. We will tell you if anything else is needed before we start.